Reduce SAIDI to historical lows by reducing the time needed to find and restore unplanned system outages with TPX Energy Intelligent Fuse and switch smart grid sensors developed for the ABB, S&C Electric and Schneider Electric line of products

Dropout, cutout fuses and sectionalizers activate when animal life and vegetation debris comes in contact with overhead conductors. They are also a source of bushfire ignitions when molten plasma falls to the ground.

TPX Energy has simplified fuse monitoring by developing the first reactive RFID based sensors specifically for transmission and distribution dropout / cutout fuses; knowing exactly when, where and what has faulted reduces the time needed to restore power.

TPX Energy Switching and Disconnect sensors confirm switch movement and position

Available in the following protocols

433Mhz Reactive RFID

900Mhz Reactive RFID

• Instantaneous Notification of Faults
• Self managing
• Reactive sensing and transmission
• No maintenance needed until activated
• Identifies Fault Location with GPS accuracy
• Identifies Fuse Manufacture
• Identifies Conductor type, number & Voltage
• The fixed frequency RFID has a range of 100 to 125 meters

ALL TPX Energy smart grid sensing devices communicate to TPX fixed RFID Concentrator/Gateways (Access points) and TPX enabled smart meters  

Knowing exactly when and where can get you there before your customers start calling.

• Clip on application
• Cost effective
• Non-intrusive
• Secure RFID
• End to end wireless solution
• Monitors fuse movement
• Deferred power supply

Parts & Switching Sensory

ABB Fuse sensors

TPX-CFS-ABB-LBUII-433 ABB Type LBUII Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-ABB-LBUII-900 ABB Type LBUII Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-ABB-SRSV-433 ABB Type SerriesV Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-ABB-SRSV-900 ABB Type SerriesV Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-ABB-ICX-433 ABB Type ICX Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-ABB-ICX-900 ABB Type ICX Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-ABB-NXC-433 ABB Type NXC Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-ABB-NXC-900 ABB Type NXC Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-ABB-EU-433 ABB Type EU Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-ABB-EU-900 ABB Type EU Cutout Fuse RFID Sensor 900Mhz 125m 

S&C Fuse sensor

TPX-CFS-SNC-XS-433 S&C Type XS Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-SNC-XS-900 S&C Type XS Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-SNC-SMD-433 S&C Type SMD Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-SNC-SMD-900 S&C Type SMD Cutout Fuse RFID Sensor 900Mhz 125m 

TPX-CFS-SNC-FTMR-433 S&C Type Fault Tamer Cutout Fuse RFID Sensor 433Mhz 125m 

TPX-CFS-SNC-FTMR-900 S&C Type Fault Tamer Cutout Fuse RFID Sensor 900Mhz125m 

Schneider Electric Sectionalizer sensors

TPX-CFS-SE-SAX-433 Schneider Electric SAX Type sectionalizer RFID Sensor 433Mhz 125m 5

TPX-CFS-SE-SAX-900 Schneider Electric SAX Type sectionalizer RFID Sensor 900Mhz 125m 

Contact us about adding intelligence to your fuses and switches, and be part of the intelligent grid solution Contact TPX Energy(61)-422-304-460 or informatin@telepathx.com